Table of Contents
Advertisement
4.6.3
IP Firmware Update Request
To start the Firmware Update download process, a short press on the Function Button is
necessary during Programming Mode is active. After a click on the "request update" button in
the web front-end, MECip-Sec switches to its boot mode (see chapter
and 'Status: update authorized' is indicated.
Table 8: Activation of Firmware Update
Step Firmware Update
1
Short press on Program button
2
Short press on Function button
3
Click on "request update" in the web front-end
4
LED2 is blinking green
5
Firmware file can be selected
6
Device restarts
Operational Description
Figure 13: Authorized Update Request
6.5 Firmware
Update)
- 25 -
MECip
SECURE
Advertisement
Table of Contents
