MECip
ETS Database
SECURE
5.4
IP (Secure) Tunneling Address Assignment
MECip-Sec provides four channels for connections via IP (Secure) Tunneling. To establish
such IP Tunneling connection, a free Individual Address must be assigned to the Tunneling
Channel. To do this, the Topology window must be used. A click on the Tunneling Channel
opens the channel´s Properties window for configuring. Then, up to four Individual Addresses
of the subline can be set.
Figure 17: Configuring of IP (Secure) Tunneling Cannels
To use IP Secure Tunneling both Secure Commissioning and Secure Tunneling must be
activated in the Properties window of MECip-Sec. After that, the passwords for protection of
each Tunneling Channel can be entered (or changed).
Figure 18: Activation of Secure Tunneling
- 30 -