Analog Inputs (Optional) - Siemens SICAM P 7KG7750 Manual

5
5.7 Input / Output Modules
5.7.5

Analog Inputs (optional)

The analog inputs (optional) allow you to measure analog signals in the range of 0 mA to 20 mA.
Proceed as follows:
1. Activate/Deactivate one or both analog inputs by ticking the corresponding check box under
1. and/or 2.
2. For each input used, set the Designation together with the Dimension (max. 6 characters).
3. You define the range of values of the signal in the fields from and to.
4. The device display will be parameterized via screen contents, the supervision of limit values
concerning the analog inputs via limit value groups.
Note
It is possible to save the values (together with the time information) recorded via analog inputs
to the memory for mean values (see chapter 5.9.2).
98
Power Meter SICAM P 7KG7750/55, Manual
E50417-B1076-C340-A6, Edition 09.2013