5.13
Changing the Communication Parameters
At delivery, the following communication parameters are preset:
•
Address:
•
Protocol:
•
Baud rate: 9600 bit/s
•
Parity:
In order to switch to another protocol, proceed as follows:
1. From the menu, select Device → Connection configuration → Edit. The dialog Device
connection parameters will open.
2. Select the combination of bus protocols supported by your device in the bus protocols in
the device field:
•
PROFIBUS DP and Modbus or
•
IEC 60870-5-103 and Modbus
Power Meter SICAM P 7KG7750/55, Manual
E50417-B1076-C340-A6, Edition 09.2013
1
Serial ASCII
No
5.13 Changing the Communication Parameters
5
125