Front Panel Connector - ECS P6VEMT Manual

CPUTEMP1: CPU Temperature Header
Pin Signal Name
1 TempP+
2 TempN-
3 Ground
Note: Please use 0-ohm resistance to connect the pin 1 & 2 to the temperature
reader chip.

Front Panel Connector

The panel connector (JPANEL1 and LPANEL1) provides a standard set of
switch and LED connectors commonly found on ATX or micro-ATX cases.
The LPANEL1 connector is designed specially for OEM customers that com-
ply with the OEM specifications. Refer to the table below for information:
JPANEL1
LPANEL1
(for OEM customers only)
Note: The plus sign (+) indicates a pin which must be connected to a positive
voltage.
(for OEM customers only)
Pin Function
Hard disk LED
1
(positive)
Hard disk active LED
3
(negative)
5
Reset Switch
7
Reset Switch
9 Reserved
Pin Function
1 HDD LED (+)
2
Power LED (-) yellow
3
Power LED (-) green
4
Power LED (+)
5 Power Switch
6
Ground
7
No pin
11
Pin Function
MSG LED [dual color
2
or single color (+)]
MSG LED [dual color
4
or single color (-)]
6
Power Switch
8
Power Switch
10 No pin
Pin Function
8 HDD LED (-)
9
VCC
10
Ground
11
Ground
12 CSSPK
13
Reset
14
Ground