ECS P6VEMT Manual page 45

power saving mode if there is any VGA activity.
LPT & COM (LPT/COM )
When this item is enabled, the system will restart the power-saving
timeout counters when any activity is detected on the serial ports, or
the parallel port.
HDD & FDD (ON)
When this item is enabled, the system will restart the power-saving
timeout counters when any activity is detected on the hard disk drive
or the floppy diskette drive.
PCI Master (OFF)
When set to Off, any PCI device set as the Master will not power on
the system.
PowerOn by PCI Card (Enabled)
Use this item to enable PCI activity to wakeup the system from a
power saving mode.
Wake Up On LAN/Ring (Disabled)
Use this item to enable LAN or modem activity to wakeup the system
from a power saving mode.
RTC Alarm Resume (Disabled)
When set to Enabled, additional fields become available and you can
set the date (day of the month), hour, minute and second to turn on
your system. When set to 0 (zero) for the day of the month, the alarm
will power on your system every day at the specified time.
IRQs Activity Monitoring
Scroll to this item and press <Enter> to view the following screen:
41