Table of Contents
Advertisement
CPU Installation Procedure
The following illustration shows CPU installation components:
Note: The pin-1 corner is marked with an arrow
Follow these instructions to install the CPU:
1.
Pull the lever sideways away from the socket then raise the lever up to a 90-
degree angle.
2.
Locate Pin-1 in the socket
and look for the cut edge in
the CPU. Match Pin-1 with
the cut edge then insert the
CPU.
3.
Swing the locking lever down and hook it under the latch on the edge of the
socket.
4.
Plug the fan on the CPU and buckle it and plug the fan's power-port into the
JCFAN1 to complet the installation.
•
To achieve better airflow rates and heat dissipation, we suggest
Notes:
that you use a high quality fan witn 4800 rpm at least.
•
CPU fan and heatsink installation procedures may vary with the
type of CPU fan/heatsink supplied. The form and size of
fan/heatsink may also vary.
14
Advertisement
Table of Contents
