ECS P6VEMT Manual page 41

the "Onchip IDE Control" label and then press the enter key, it will take you a
submenu with the following options.
OnChip IDE Channel0/1 (Enabled)
The integrated peripheral controller contains an IDE interface with
support for two IDE channels. Select Enabled to activate each chan-
nel separately.
IDE Prefetch (Enabled)
The onboard IDE drive interface supports IDE prefetching, for faster
drive access. If you install a primary and/or secondary add-in IDE in-
terface, set this field to Disabled if the interface does not support
prefetching.
IDE Primary/Secondary Master/Slave PIO (Auto)
The IDE PIO (Programmed Input/Output) fields let you set a PIO
mode (0~4) for each of the IDE devices that the onboard IDE inter-
face supports. Modes 0 through 4 provide successively increased
performance. In Auto mode, they system automatically determines
the best mode for each device.
IDE Primary/Secondary Master/Slave UDMA (Auto)
Ultra DMA / 33 implementation is possible only if your IDE hard drive
supports Modes 0 through 4 provide successively increased per-
formance. In Auto mode, they system automatically determines the
best mode for each device.
Multi-Media Setting
The multimedia-setting submenu is used to configure various multimedia pe-
ripherals such as audio and game equipment. If you highlight the literal "Press
Enter" nest to the "Multi-media setting" label and then press the enter key, it
will take you a submenu with the following options.
Onboard Legacy Audio (Enabled)
This option controls the onboard legacy audio.
Sound Blaster (Disabled)
Hardware SoundBlaster Pro for Windows DOS box and real-mode
DOS legacy compatibility.
SB I/O Base Address (220H)
Change the SounBlaster Pro Base I/O Address settings.
SB IRQ Select (IRQ5)
Change the SoundBlaster Pro interrupt signal.
SB DMA Select (DMA1)
Change the SoundBlaster Pro direct memory access setting.
MPU-401 (Enabled)
37