ECS P6VEMT Manual page 10

Table of Mainboard Components
Label Component
BAT1 Three volt realtime clock battery
BIOS_WP1 BIOS Flash protect
COM2 Onboard serial port connectors
CPU Socket Socket 370 for PIII/C3
CPU_TEMP1* CPU Temperature Header
DIMM1 ~ DIMM2 Two 184-pin DDR sockets
FDD1 Floppy disk drive connector
IDE1 Primary IDE channel
IDE2 Secondary IDE channel
ISA1 Industry Standard Architecture slot (optional)
JATXPWR1 ATX 20-pin power connector
JAUDIO1 Front panel MIC/Speaker Out header
JCDIN1 Primary CD-in connector
JCDIN2 Secondary CD-in connector
JCFAN1 Case fan connector
JCMOS1 Clear CMOS jumper
JPANEL1 Connector for case front panel switches and LED indicators
JSFAN1 System fan connector
JTAD1 Telephony audio header
JUSB2 Connector for front panel USB ports
JWOL1 Wake On LAN wakeup connector
JWOM1 Wake On Modem wakeup connector
LAUDIO1* Front panel MIC/Speaker Out header
LSIR1* Serial Infrared port
LPANEL1* Connector for case front panel switches and LED indicators
LUSB1* Front panel USB headers
PCI1 ~ PCI3 Three 32-bit add-on card slots
SIR1 Serial Infrared port
SMI1 System Management Interrupt
* Reserved for OEM use only
This concludes Chapter 1. The next chapter explains how to install the main-
board.
6