Channel To Channel Transfers; Erasing Memory Channels; Full Reset - Kenwood TS-870S Instruction Manual

■ Channel to Channel Transfers

1 Press [RX M.CH] to select Memory Recall mode.
AGC AUTO
M.CH
CW
2 Select the memory channel that contains the data
to be transferred.
3 Press [M.IN] to select Memory Scroll mode.
AGC AUTO
M.CH
4 Select the destination memory channel.
5 Press [M.IN].
These tables illustrate how data is transferred
between memory channels.
Channel 00 ~ 98
RX frequency
RX mode
TX frequency
TX mode
Subtone
frequency
Channel lockout
OFF/ON
Channel 00 ~ 98
RX frequency
RX mode
TX frequency
TX mode
Subtone
frequency
Channel lockout
OFF/ON
FSK M. SCR
\ Channel 00 ~ 98
RX frequency
\
RX mode
\
TX frequency
\
TX mode
\
Subtone
\
frequency
Channel lockout
\
OFF
\ Channel 99
TX/RX
frequency
\
Start frequency
TX/RX mode
\
End frequency
\
—
—
Channel lockout
\
OFF
Channel 99
TX/RX
frequency
TX mode
—
Channel lockout
OFF/ON
Note:
◆ If a memory channel is recalled, then the recalled data is
changed but not saved to the memory channel, pressing
in Step 5 transfers the new data to the destination
[M.IN]
memory channel.
◆
In the FM mode, when channel 99 is copied to another
memory channel (00 ~ 98), a Tone frequency of 88.5 Hz is
stored automatically in the destination channel.

ERASING MEMORY CHANNELS

This procedure erases all data from the selected
memory channel
1 Press [RX M.CH] to select Memory Recall mode.
AGC AUTO
M.CH
USB
2 Select the memory channel that contains the data
that you want to erase.
3 Press [CLR] for approximately two seconds.
• A beep sounds to confirm that the channel data is
erased.

■ Full Reset

Do a Full Reset if you want to erase all data in all
memory channels or if a Partial Reset {page 63}
does not correct a problem. Remember that a Full
Reset requires that you re-enter any memory
channel data again after the initialization if you want
to use those channels. A Full Reset also initializes
all electronic keyer settings to their default values.
Press [A=B]+[ ].
9 MEMORY FEATURES
\
Channel 00 ~ 98
RX frequency
\
TX frequency
RX mode
\
TX mode
Subtone
frequency
Channel lockout
\
OFF
57