Other Functions - Daikin MKS-T Series Service Manual

Wall Mounted and LSP Duct Type Functions

1.15 Other Functions

1.15.1 Signal Receiving Sign
When the indoor unit receives a signal from the remote controller, the unit emits a signal
receiving sound.
1.15.2 Indoor Unit ON/OFF Switch
Indoor unit ON/OFF switch is provided on the display of the unit.
 Press ON/OFF switch once to start operation. Press once again to stop it.
 ON/OFF switch is useful when the remote controller is missing or the battery has run out.
 The operation mode refers to the following table.
 In the case of multi system operation, there are times when the unit does not activate with
CTKS, CTKB Series
1.15.3 Auto-restart Function
If a power failure (even a momentary one) occurs during the operation, the operation restarts
automatically in the same conditions as before when the power supply is restored to the
conditions prior to the power failure.
Note
It takes 3 minutes to restart the operation because 3-minute standby function is activated.
63
Operation mode Temperature setting
COOL
ON/OFF switch.
ON/OFF
Airflow rate
22°C Automatic
FDKS Series
ON/OFF
switch
R4000353
SiSG121917E
ON/OFF
switch
R4003597
Part 4 Functions and Control