Service Diagnosis
3.2.2 Method 2
1. Press the center of TEMP button and MODE button at the same time to enter the diagnosis
2. Press TEMP or TEMP button and change the number until you hear the two
3. Diagnose by the sound.
4. Press MODE button.
111
mode.
The left-side number blinks.
consecutive beeps or the long beep.
Beep: The left-side number does not correspond with the error code.
Two consecutive beeps: The left-side number corresponds with the error code but the
right-side number does not.
Long beep: Both the left-side and right-side number correspond with the error code.
The numbers indicated when you hear the long beep are the error code. Error codes and
description
Refer to page 114, 115.
The right-side number blinks.
SiSG121917E
(R19114)
(R14967)
(R19115)
(R19116)
(R14968)
Part 6 Service Diagnosis