Chapter 15
15.9.2 Clearing Counters
- Maintenance/parts counter all clear
Execute service mode > CLEAR > COUNTER to clear all maintenance/parts counters.
- Counter clear on parts replacement
Press the numeric keypad key 0 after displaying the counter for a part just replaced, and the counter will be
cleared individually.
15.10 Service Report (REPORT)
15.10.1 Report Output
The table below lists the kinds of reports that are supported.
Item
SERVICE DATA LIST
SYSTEM DATA LIST
SYSTEM DUMP LIST
COUNTER REPORT
ERROR LOG LIST
SPEC LIST
SERVICE LABEL
Explanation
Service mode service soft switch output (SSSW, MENU, NUMERIC
Param., SPECIAL, NCU, SCAN, PRINT, SYSTEM, ROM, start date)
Service mode service soft switch output (SSSW, MENU,
NUMERIC Param., SPECIAL, NCU, SCAN, PRINT, SYSTEM,
ROM, start date)
System dump list output
Transmission count, reception count, record chart count, error count and
other outputs
Counter output
Jam and error history output
Type setting, print speed, memory size, ROM indication, adjustment data
and other outputs
Output of an entry format for the service label affixed to the rear cover as
shipped
0013-1410
0013-1411