Canon imageRUNNER 1019J Service Manual page 47

6.2 Image Formation Process 6.2 Image Formation Process
6.2.1 Reproduction Processes 6.2.1 Reproduction Processes
The machine uses an indirect electrostatic method, and is constructed as shown below The machine uses an indirect electrostatic method,
Cleaning blade Cleaning blade
Drum Drum
Static Static
eliminator eliminator
Transfer charging Transfer charging
roller roller
Developing Developing
cylinder cylinder
Paper Paper
The machine's image formation processes can be The machine's image formation processes can be divided into the following 5 blocks (7steps):
and is constructed as shown below
Contact sensor Contact sensor
Image processing block Image processing block
Fixing unit Fixing unit
Primary Primary
charging charging
roller roller
Paper Paper
F-6-2 F-6-2
divided into the following 5 blocks (7steps):
Copyboard glass Copyboard glass
Laser scanner unit Laser scanner unit
Developing unit Developing unit
Chapter 6 Chapter 6
0013-1103 0013-1103