Canon imageRUNNER 1019J Service Manual page 17

Chapter 2
2.1.3 Installation Procedure
0013-4622
1. Preparations for main body
1) Turn off the main power switch of the host machine and disconnect the power plug from the outlet.
2) To release the hooks at the back of the machine, move the machine backward until the hooks are about 10 cm
away from the edge of the desk and so on.
3) Remove the screw [1].
4) Release the three claws[2] at the right and the three claws [3] at the top.
5) Release the two claws [4] at the bottom, and then detach the rear cover [5].
[3]
[2]
[1] [5]
[4]
F-2-3