Canon imageRUNNER 1019J Service Manual page 103

Chapter 15
6-3:SENOR
[1] - [8]
Press numeric keypad key 1.
SENSOR CHECK
0:NORMAL 1:LATCH
Select a sensor mode.
0: NORMAL
Indications change from 0
to 1 as the sensors turn on.
Indications change from 1
to 0 as the sensors turn off.
1: LATCH
Indications change from 0
to 1 as the sensors turn on.
Indications do not change back
from 1 to 0 once the sensors turn
on from the off state.
Press numeric keypad key 2
SWITCH CHECK
[0] - [1]
Press numeric keypad key 3
DS ON DES of HPS ON
BCVS of
DS: ADF original set sensor (SR2001):
DES: ADF document edge snsor (SR2002):
HP: CS HP sensor (SR401):
On/Paper presence, Of/Paper absence
BCVS: Not used
Press numeric keypad key 0.
SENSOR NORMAL
[0] - [2]
Press numeric keypad key 1.
SENSOR LATCH
[0] - [2]
Press numeric keypad key 0.
CAS 0000
LOCK 0
CAS 0000: Not used
LOCK 0: Not used
Press numeric keypad key 1.
O P1 00 00 O P2 00 00
OP3 0000
OP1: Not used
OP2: Not used
OP3: Not used
On/Paper presence, Of/Paper absence
On/Paper presence, Of/Paper absence
F-15-17
Press numeric keypad key 0.
CAS 0 REG 0
DEL 0 0 MULTI 0
CAS:Cassette paper sensor (SR9): 0/Document presence, 1/Document absence
REG:Registration sensor (SR11): 0/Document presence, 1/Document absence
DEL 0 0:
Delivery sensor (SR5): 1/ Document presence, 0/ Document absence
Not used
MULTI:Manual paper sensor (SR12): 0/Document presence, 1/Document absence
Press numeric keypad key 1.
TONER 0 FULL 0
2ND-DEL 0 0
TONER: Waste toner full detection sensor (SR6)
FULL: Delivery
full sensor (SR10): 0/Document presence, 1/Document absence
2ND-DEL 0 0:
Not used
Not used
Press numeric keypad key 2.
OP1 0 0 OP2 0 0
OP3 0 0 PATH 0 0
OP1 0 0:
Not used
Option casstte paper sensor (SR6)
: 0/Document presence, 1/Document absence
OP2 0 0:
Not used
OP3 0 0:
Not used
PATH 0 0:
Not used
: 0/Document presence, 1/Document absence