Installing A Numeric Keyboard - Motorola VC70N0 Product Reference Manual

2 - 20 VC70 Vehicle Computer Product Reference Guide
Attach the VC5090 keyboard brackets (part of the VC5090 keyboard assembly) to both sides of the VC70,
2.
using the cap screws with captive washers. Only tighten the cap screws three turns.
Insert the keyboard locking knobs through the washers and brackets and screw into the keyboard. Tighten fully
3.
to lock into place.
Torque the bracket cap screws to 230 kgf-cm (200 lbs-in).
4.
Connect the VC5090 keyboard cable to the supplied adapter cable.
5.
Connect to a VC70 USB
Connector
VC5090 Adapter Cable
Figure 2-21
Connect the USB connector of the adapter cable into one of the VC70 USB connectors and carefully screw the
6.
locking screws using a flat head screw driver.

Installing a Numeric Keyboard

The Numeric keyboard is installed using the following items:
numeric keyboard mount with all required screws for attaching the keyboard to the mount and the mount to
•
the vehicle computer
Attach the numeric keyboard to the mount, using six M4x10mm torx head screws with captive washers.
1.
Torque the numeric keyboard torx head screws to 8 + 10% kgf-cm (7 + 10% lbs-in).
2.
Connect the VC5090 Keyboard
Cable here