Using The Keyboard - Motorola VC70N0 Product Reference Manual

To calibrate your VC70:
Tap >
1. Settings
Stylus Properties - Calibration Tab Window
Figure 3-25
Tap the
2. Recalibrate
Carefully press and briefly hold stylus
Calibration Screen
Figure 3-26
As the screen instructs, carefully touch and briefly hold on the center of each target that appears on the screen.
3.
Repeat as the target moves around the screen.
Tap the screen to accept the new calibration.
4.
NOTE If the calibration screen fails to respond, contact Support Central for assistance.

Using the Keyboard

If the present calibration does not allow you to use the touch screen, use the externally connected keyboard (or
any standard USB keyboard) to access the calibration:
> icon >
>
Control Panel Stylus
button. The calibration screen displays.
on the center of the target.
Repeat as the target moves around
the screen.
Press the Esc key to cancel.
tab.
Calibration
Operating the VC70 3 - 19