Calibrating The Screen; Using The Display - Motorola VC70N0 Product Reference Manual

3 - 18 VC70 Vehicle Computer Product Reference Guide
shows the reduced power consumption mode active components.
Table 3-7
Reduced Power Consumption Mode
Table 3-7
CPU
Sensor Micro
Display backlight
WLAN state (On)
WLAN state (connected)
WLAN state (in PTT call)
Bluetooth
Touch screen heater
RS232#1 5Vout
RS232#2 5Vout
USB#1 5Vout (external keyboard)
USB#2 5Vout
External RS232/USB peripherals
External speaker
External microphone
Ethernet
CAN bus
Temperature/Humidity sensor
Ambient light sensor
Accelerometer

Calibrating the Screen

Using the Display

CAUTION
This section describes how to calibrate the VC70 touch screen. If the current calibration does not allow for easy
touch screen input or you want to recalibrate the screen at any time, refer to
NOTE Use a Stylus for the screen calibration.
VC70 Component
Do not use sharp objects when touching the screen. Use your finger tip or a stylus when touching the
screen.
Active
On
On
Level 1
On (not connected)
On (connected)
On (external speaker is
disconnected)
No change
Off
Off
Off
Off
Off
Off
Off
On
Off
Off
On
Off
On
Using the Keyboard on page 3-19.