Motorola VC70N0 Product Reference Manual page 51

System Manager Window
Figure 2-32
Scan the
5. Set All Defaults
Set All Defaults Bar Code
Figure 2-33
NOTE The above allows the scanner to reset from any previous configuration to the default configuration.
Scan a serial configuration barcode.
6.
Serial Configuration Bar Code
Figure 2-34
Scan the Host: RTS High barcode.
7.
Host: RTS High Bar Code
Figure 2-35
NOTE RTS must be configured High to enable reading.
Scan the send row decode data barcode.
8.
Send Row Decode Data Barcode
Figure 2-36
bar code.
Installation 2 - 27