Installing The Optional Keyboard - Motorola VC5090 Quick Reference Manual

20

Installing the Optional Keyboard

The optional keyboard is only available for the full-screen
NOTE
configuration.
The keyboard kit contains the following items:
• keyboard
• two keyboard brackets
• four caps screws with captive washers
• two locking knobs, two flat washers and two lock washers.
Attach the keyboard brackets to both sides of the VC5090, using the
1.
caps screws with captive washers, as shown below:
Left Hand
Bracket
Cap Screws with
Captive Washers
Flat Washer
Lock Washer
Locking Knob
Torque the screws to 230 kgf/cm (200 in-lbs).
2.
Squeeze the quick release tabs on the
3.
keyboard and align the keyboard with
the brackets.
Release the quick release tabs to insert
4.
the alignment pins through an alignment
pin hole on each of the brackets.
Insert the keyboard locking knobs
5.
through the washers and brackets and
screw into the keyboard.
Plug the keyboard cable into the USB/Keyboard connector.
6.
Alignment Pin Holes
VC5090 Vehicle Computer
Alignment Pin
Quick Release Tabs