Cable Box Universal Remote Control Feature - Panasonic PV-DF2700-K Service Manual

Tv/dvd/vcr combination
Table of Contents

Advertisement

Cable Box Universal Remote Control Feature

Universal Remote Control Setup
1
Find your DSS box or Cable box Brand
Code Number from one of the charts on the
next page.
2
Setup remote.
1) Hold down DSS CABLE.
2) Press NUMBERED keys to enter code.
and
• Enter numbers as follows:
e.g.
3
Notes
• The remote control will not operate all DSS receivers or Cable Boxes
made by the manufacturers listed. If you get no results, your particular
brand cannot be controlled.
• Please repeat the Universal Remote Control Setup after replacing
remote control batteries.
Using the Universal Remote Control
(Available Buttons / Functions)
Once the remote control has been properly set up, you can select
TV-VCR, FM, DVD, DSS or CABLE mode depending on which
functions you wish to control. (See below.)
Press
, FM, DVD, or DSS CABLE on the remote control to
select the desired mode. (See below for buttons available in
each mode.)
Set to
, FM, DVD:
All TV functions, as well as functions of TV-VCR
Set to DSS CABLE:
• Basic VCR functions, e.g. PLAY, REC, etc.
• CABLE/DSS functions, e.g. POWER, ENTER, NUMBERED
keys (except 100 key), CH UP/DOWN.
Notes
• In DSS or CABLE mode, POWER, CH Up/Down, NUMBERED
keys, ACTION, PROG/VCR+, DISPLAY/ENTER, SEARCH/SKIP-,
R- TUNE, SELECT, SET, CM SKIP/SKIP+, COUNTER RESET/
ZOOM, ANGLE, AUDIO, TITLE, SUBTITLE, MENU, or
ADD/DLT/CLEAR are not available. Press
these functions.
• Due to changes in infra-red commands used by manufacturers,
some brands have several codes. If your unit does not respond
to the first code, please try the next one.
• In DSS or CABLE mode, it may be necessary to press ENTER after
pressing NUMBERED keys for channel selection.
• Depending on your DSS receiver or Cable box brand, some of the
functions listed may not be remote controllable.
• Some DSS receiver or Cable box brands require you to turn on the
power manually.
28
For 02, enter 0, then 2.
For 25, enter 2, then 5.
For 102, enter 1, then 0, then 2.
Confirm code entry.
Press POWER* to turn
selected unit ON or OFF.
• See below for a list of controllable
functions in each mode.
,
FM, or DVD.
, FM, DVD to use
For assistance, call 1-800-211-PANA(7262)
Universal Remote Control is...
The Remote Control may be set up to
control some basic DSS or Cable box
functions.

Advertisement

Table of Contents
loading

Table of Contents