Table of Contents
Advertisement
Unit
Decoder
When DVDs recorded in Dolby Digital or dts are played, Dolby Digital bitstream or dts bitstream is output
from the unit OPTICAL digital audio output connector. When the unit is connected to a Dolby Digital decoder
or dts decoder, you can enjoy theatre-quality audio in your home. [An optical digital audio cable (optional) is
required when an optional Dolby Digital decoder or dts decoder is used.]
Notes on connecting an
optical digital audio cable
(optional)
• Remove dust protection cap from
optical digital audio output. Firmly
connect the cable to the connector.
• Always reattach the dust protection
cap when connector is not in use.
Dust protection cap
Caution for optical digital
audio output connector:
• When connecting an
amplifier (with an optical digital
input connector) which does not
contain the Dolby Digital (AC-3)
or dts decoder, be sure to select
"OFF" at "Dolby Digital" and
"OFF" at "dts" of the Settings for
DVD Operation "AUDIO OUTPUT"
(see page 62).
• Otherwise any attempt to
play DVDs may cause such
a high level of noise that it
may be harmful to your ears
and damage your speakers.
• When a dts decoder is
connected, please select
"Bitstream" at "dts" of the
Settings for DVD Operation
"AUDIO OUTPUT". If "OFF" is
selected, there will be no sound.
(See page 62).
• Video CDs and CDs can be
played as normal.
Note:
• Some dts decoders which do
not support DVD-dts interface
may not work properly with the unit.
Dolby Digital
with
or
dts
(digital theatre systems)
Amplifier
(AC-3)
Speaker
11
Advertisement
Table of Contents
