Table of Contents
Advertisement
A. Confirm that the Locking Tab (L-6) under the Cassette Up Ass'y is in Hole on
the Mechanism Chassis when installing the Cassette Up Ass'y. Then, slide the
Cassette Up Ass'y towards the back.
B. When installing 2 Screws (S-18), slide the Holder Unit (Refer to "METHOD FOR
LOADING/UNLOADING OF MECHANISM" in Service Notes) to tighten screws.
Then, slide it back to the EJECT Position.
C. Hook Spring (P-1) to the Drive Rack Arm on the Mechanism Chassis.
7. Reinstallation of Cushion
When reinstalling the Cushion, fasten it securely to the Mount Plate using double
-face tape as shown below.
6.2. MECHANISM SECTION
Fig. D7
69
Advertisement
Table of Contents
