Dvd Operation Using On-Screen Displays - Panasonic PV-DF2700-K Service Manual

DVD Operation using On-Screen Displays

When DISPLAY is pressed, On-Screen Displays show disc
information (title/chapter/track number, elapsed playing time)
and unit information (repeat play, play mode).
1
Note
DISPLAY button does not function
while DVD TITLE MENU is
displayed.
2
3
<Example of DVD>
T I TLE : 12
CHAPTER : 11 11
CHAPTER 0 : 12 : 34
T I TLE : 12
CHAPTER CHAPTER : 24 24
SELECT :
SET : SET NEXT : DISPLAY
SELECT :
SET : SET NEXT : DISPLAY
<Example of Video CD>
TRACK : 12 12 VIDEO CD
TRACK
PBC : OFF 0 : 12 : 34
TRACK 17
TRACK : 17 VIDEO CD
PBC : OFF
SET : SET NEXT : DISPLAY
SET : SET NEXT : DISPLAY
Note
When DISPLAY button is pressed during playback of a Video CD with
Playback control, the NUMBERED keys are not available on the
displayed screen. In this case, press DISPLAY again to remove the
displayed screen.
Display On-Screen
Displays.
Press DISPLAY in play or
stop mode.
• Each time DISPLAY is pressed,
On-Screen Display changes as
shown below (refer to page 58
or 59.)
Selected disc information
Selected unit information
Normal Screen
Select the desired item.
1) Press (or
select.
2) Press SET to set.
Select the desired
setting.
1) Press to select.
2) Press SET to set.
DVD • For some functions the setting will
be registered immediately without
DVD
pressing SET.
0 : 12 : 34
• When numbers are displayed (e.g.
title number), the NUMBERED
keys are also available.
To make corrections,
r
epeatedly press
to move to error, then correct
•
Pressing is effective for elapsing
time instead of the above buttons.
Press repeatedly to delete the
error, then correct.
To return to the normal
0 : 12 : 34
screen,
press RETURN or DISPLAY
repeatedly.
Check list before you begin.
It is necessary, press DVD to enter
DVD mode.
) to
and SET
.
• When
button is being operated, it means that
the corresponding operation is prohibited
by the unit or the disc.
appears on the screen while a
57