Table of Contents
Advertisement
For assistance with your machine, visit our website at www.DeltaMachinery.com for a list of service centers or call Delta Power Equipment
Customer Care at 1-800-223-7278.
FAILURE TO START
If your machine fails to start, check to make sure the prongs on the cord plug are making good contact in the receptacle, and check reset
button on power switch housing. Also, check for blown fuses or open circuit breakers in your power line.
Question:
How do you make the blade parallel to the miter slot?
Can this unit be converted to 220 volt?
What is the process for resetting the motor?
What do I do if my unit is humming or my blade is not turning?
What do I do if my unit has no power?
How do I find my local repair center?
How do I get Warranty work done on my product?
A complete line of accessories is available from your DELTA
Centers. Please visit our Web Site www.DeltaMachinery.com for an online catalog or for the name or your nearest supplier.
Since accessories other than those offered by DELTA
accessories could be hazardous. For safest operation, only DELTA
product.
TROUBLESHOOTING
Solution:
Reference Page 29.
No.
Reference "OVERLOAD PROTECTION" section on page 32.
Contact our Customer Care team by calling 1-800-223-7278 or
emailing us at customercare@dpec-na.com.
Begin by checking the "POWER SOURCE" and "EXTENSION
CORDS" sections on page 10 to ensure you are utilizing the
machines power appropriately. If the problem continues, Contact
our Customer Care team by calling 1-800-223-7278 or emailing us
at customercare@dpec-na.com.
Contact our Customer Care team by calling 1-800-223-7278 or
emailing us at customercare@dpec-na.com.
Keep a copy of your receipt to present to our Service Center if any
issues arise with your machine.
ACCESSORIES
Supplier, DELTA
®
43
Factory Service Centers, and DELTA
®
have not been tested with this product, use of such
®
recommended accessories should be used with this
®
Authorized Service
®
Advertisement
Table of Contents
