Pvc Performance Statistics - Paradyne FrameSaver 9120 User Manual

Displaying System Information

PVC Performance Statistics

4-28
Permanent Virtual Circuit performance statistics only appear when PVCs ( V) is
selected from the screen function keys area at the bottom of the Network, Port-1,
Port-2, BRI-B1, and BRI-B2 Frame Relay screens.
Follow this menu sequence:
Main Menu Status
[Port 1/Port 2/BRI-B1/BRI-B2]
NOTE:
For total activity for a DLCI over the backup channels, check the DLCI's
statistics on both BRI interfaces. Multiple backups of the DLCI may have
occurred, and backup may not have occurred over the same BRI interface
each time.
Should it appear that PVC connections are not being created automatically when
using the auto-configuration feature, change and save another FR Discovery
mode, then change it back to the desired mode.
Statistic What It Indicates
Interface's PVC
DLCI DLCI number selected for display of the PVC statistics for a
specific DLCI.
This is a DLCI selection or entry field.
Tx/ Rx Characters Number of data octets ( 8-bit bytes) sent/received for the
selected DLCI on the interface.
Tx / Rx Frames Number of frames sent/received for the DLCI on the interface.
Tx / Rx Frames Number of frames sent/received for the DLCI on the interface
Within CIR that are within the committed information rate that had been
configured.
Tx / Rx Frames Number of frames sent/received for the DLCI on the interface
Exceed CIR that exceed the committed information rate that had been
configured.
Tx / Rx Frames Number of frames dropped for the DLCI on the interface due to
Dropped CIR enforcement or congestion control.
Tx / Rx Frames Number of frames sent/received for the DLCI on the interface
With DE that have the discard eligible bit set.
Performance Statistics
PVCs
May 1998 9121-A2-GB20-20