What Statistics Are Collected - Paradyne FrameSaver 9120 User Manual

What Statistics Are Collected?

9121-A2-GB20-20
Performance statistics are collected for the:
Physical interfaces
Frame relay link
Frame relay DLCI PVC connections
The following sets of statistics appear, based upon the interface selected:
Select . . .
1
Network Physical
Network Line
Network Frame Relay
2
Port-1 or 2 Physical
3
Port-1 or 2 Frame Relay
4
DBM Physical
4
BRI-B1 Physical
3, 4
BRI-B1 Frame Relay
4
BRI-B2 Physical
3, 4
BRI-B2 Frame Relay
Clear Statistics
Selection only appears when:
1
Line Framing Format is set to ESF.
2
Port is enabled.
3
Interface (the port, BRI-B1, or BRI-B2) is enabled and the frame relay Link
Status is enabled.
4
ISDN BRI DBM is installed and enabled.
For the . . .
Network interface's physical performance statistics.
Network line's performance statistics.
Network interface's frame relay performance statistics.
Port physical interface's performance statistics.
Port's frame relay performance statistics.
ISDN BRI DBM's physical interface performance
statistics.
DBM's BRI physical performance statistics for
B-channel 1.
DBM's BRI frame relay performance statistics for
B-channel 1.
DBM's BRI physical performance statistics for
B channel 2.
DBM's BRI frame relay performance statistics for
B-channel 2.
Screen that allows performance statistics to be cleared
(reset to 0). You can clear these statistics for the
individual interfaces, or for all interfaces.
Statistics can also be cleared from the individual
performance statistics screens.
May 1998
Displaying System Information
4-21