Ending A Session - Paradyne FrameSaver 9120 User Manual

Startup

Ending a Session

3-4
Use the Exit function key from any screen to terminate the session.
Procedure
To end a session:
1. Press Ctrl-a to go to the screen function key area.
2. Select Exit and press Return. The session is terminated; the terminal is
disconnected.
3. If ending a configuration editing session, the Save Configuration screen
appears with the Save Changes? prompt.
If you select . . .
No
Yes
Then . . .
The session is terminated without the configuration
option changes being saved.
The Save Configuration To screen appears.
Select a configuration option area to save your
changes to (Current, Customer 1, or Customer 2), and
press Return.
Configuration option changes are saved and the
session is terminated.
May 1998 9121-A2-GB20-20