Status Information - Paradyne FrameSaver 9120 User Manual

Status Information

9121-A2-GB20-20
Status information is useful when monitoring the FrameSaver access unit. Use
the Status menu to display information concerning:
Select . . .
System and Test Status
LMI Reported DLCIs
PVC Connection Status
DBM Interface Status
To . . .
View System and Test Status, including:
Health and Status – Displayed in priority order
(highest to lowest).
Self-Test Results – Diagnostic test run on the device
itself. Only displayed if Self-Test was enabled when
the access unit was powered up.
Test Status – Indicates which tests are currently
active.
Select an interface (Network, Port-1, Port-2, BRI-B1, or
BRI-B2) and view the status of all DLCIs reported on
that interface.
Only available when at least one interface has frame
relay Link Status set to Enable and LMI Personality is
set to User Side.
View Source (or originating), Primary Destination, and
Alternate Destination information for each
PVC connection. Information includes:
Links (interfaces)
DLCIs
EDLCIs
Network statuses
Management PVCs are also shown.
View the ISDN BRI DBM's interface (DBM), if installed
and enabled. Information includes:
Line Status
Operating mode
Name of the active ISDN call profile's destination
Last cause value message
Calling ID of the remote DBM
May 1998
Displaying System Information
4-3