Fuse Replacement - Furuno FSV-84 Operator's Manual

11.3

Fuse Replacement

The fuses in the processor unit, transceiver unit and hull unit protect them from
overcurrent and equipment fault. If the power cannot be applied, first check the
fuse in the processor unit and transceiver unit. If the power still cannot be turned
on, have a qualified technician check the fuses in other units.
Unit
Processor unit
Transceiver unit
Transceiver unit (B voltage power
section)*
Transceiver unit (DC power section)*
Hull unit*
* Fuse cannot be replaced by operator.
Unit and fuse
WARNING
Use the proper fuse.
Use of a wrong fuse can cause fire or
damage the equipment.
11. MAINTENANCE, TROUBLESHOOTING
Fuse rating
FGB0 10 A 250 VAC (2 pcs.)
FGB0 20 A 250 VAC (2 pcs.)
For 100/110/115 VAC
FGB0 10 A 250 VAC (2 pcs.)
For 220/230 VAC
FGBO 15 A 250 VAC (2 pcs.)
FGMB 5 A 250 VAC (2 pcs.)
FGMB 2 A 250 VAC (1 pc.)
11-3