Audio Operations; Adjusting The Volume Level - Roland V-02HD Reference Manual

Audio Operations

Adjusting the Volume Level

Here's how to adjust the volume of the audio input and audio output.
1
[MENU] button 0 " AUDIO INPUT" 0 select " INPUT 1,"
" INPUT 2," or " AUDIO IN. "
2
Use the [VALUE] knob to select "INPUT LEVEL."
3
Use the [VALUE] knob to adjust the input volume.
Raise the volume level of audio you want to make more
prominent, for example, an emcee microphone, and lower the
volume level for other audio.
When no audio is input, and for audio that is unused, lower the
volume level to minimum (-INF).
4
Press the [VALUE] knob to confirm.
5
Press the [MENU] button twice to return to the MENU
screen.
6
Use the [VALUE] knob to select "AUDIO OUTPUT" 0
"OUTPUT LEVEL."
7
Use the [VALUE] knob to adjust the output volume.
8
Press the [MENU] button several times to close the menu.
22
Level meter indication
An audio level meter is shown at the lower
right of the preview display. The level meter
illumination lets you check whether the volume
is adjusted appropriately.
Indicator Status
Lights up at 0 dB or higher.
Red
It indicates an excessive volume level.
Lights up at -20 to -1 dB.
Yellow
It indicates an appropriate volume level.
Lights up at -50 to -21 dB.
Green
It indicates a too-low volume level.
* If the volume level of speaker output is unsuitable even when
the volume level on the V-02HD has been adjusted so that level
meter light up in yellow, adjust the volume for the speakers
and amplifiers. Using "OUTPUT LEVEL" to make adjustments can
sometimes result in distortion or poorer sound quality.
MEMO
5 If you use the [OUTPUT FADE] knob to fade-in/out the
program output video (p. 19), the output audio also fades-in/
out simultaneously.
5 You can change the function that's assigned to the [OUTPUT
FADE] knob so that it adjusts only the output volume. Set the
SYSTEM menu item OUTPUT FADE ASSIGN "TURN LEFT" or
"TURN RIGHT" to "AUDIO. "
5 You can output a test tone that's convenient when adjusting
the volume. In the SYSTEM menu item "TEST TONE, " specify
the test tone that will be output.