Table of Contents
Advertisement
Audio Operations
Adjusting the Volume Balance
Here's how to adjust the volume balance of each input and the overall volume.
1.
Move the [MAIN] fader to a position near the thick lines on the level scale.
2.
Adjust the volume balance with the [MIC 1], [MIC 2] and [LINE IN] faders.
For example, if you're using MIC 2 for the moderator/MC's mic, raise the volume of MIC 2 and lower the volumes for MIC 1
and LINE IN.
Turn the volume all the way down for inputs that aren't being used.
Adjust the volume of the headset mic or onboard mic with the [HEADSET/ONBOARD MIC] knob.
3.
Use the [MAIN] fader to adjust the output volume.
Adjust the volume so that the SIG/PEAK indicator lights up yellow.
Lit color
Red
Yellow
Green
24
Excessive volume (0 dB and above)
Appropriate volume (-20 to 1 dB)
Insufficient volume (–40 to -21 dB)
Status
Advertisement
Table of Contents
