Safety And Instructional Decals - Toro Z Master 2000 Series Operator's Manual

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area of potential
danger. Replace any decal that is damaged or lost.
1. Crushing hazard of hand—do not remove the whole bagger from the machine: 1. Open the bagger top. 2. Remove the bag(s)
from the bagger. 3. Do not remove the bagger top when it is closed; open the bagger top and then remove it.
1-653558
103–2076
106-0871
1. Warning—read the
Operator's Manual.
2. Warning—wear hearing
protection.
3. Cutting/dismemberment
hazard, impeller—keep
hands away from moving
parts; keep all guards in
place.
109–6809
4
121–3212
4. Cutting/dismemberment
hazard,
impeller—disengage
the PTO, remove the key
from the ignition, wait for
all moving parts to stop.
5. Thrown object hazard—do
not run the blower without
the collection system
installed and latched.
6. Warning; loss of
traction/control
hazard—ultra vac
counterbalance weight(s)
installed without ultra vac
may cause loss of traction
and steering control;
ultra vac installed without
ultra vac counterbalance
weight(s) will cause
reduced stability; install
the weight(s) only when
ultra vac is installed.