Furuno GP-3500F Operator's Manual page 28

1. BASIC OPERATION
For example, press the [8] key to display the PLOTTER SETUP menu.
3. Rotate the [ENTER] knob to select item which you want to change the setting.
You can also select item by rolling the trackball in up-down direction.
4. Roll the trackball in left-right direction to select option (with the red rectangle).
When the option is prefixed with numeral, you can select it by pressing the
appropriate numeric key. In this manual selection by numeric key is used when
both selection methods are available.
5. Press the [MENU] key several times to close the menu.
1-18
8. PLOTTER SETUP
LORAN-A GRI
CORRECTION 1
CORRECTION 2
LORAN-C GRI
CORRECTION 1
CORRECTION 2
DECCA CHAIN
CORRECTION 1
CORRECTION 2
TD DISPLAY
RESET TRIP LOG
PLOTTER RANGE SETUP 1. YES
PANEL-DIMMER
HUE
00:1L0 01:1L1 02:1L4
05:1L7 06:1S1 07:1S2 08:1S3 09:1S4
10:1S6 11:2H3 12:2H4 13:2H5 14:2H6
15:2S0 16:2S1 17:2S2 18:2S3 19:2S4
20:2S5 21:2S6 22:2S7
TURN KNOB TO SELECT MENU.
SELECT THE ITEM OF EACH MENU BY TRACKBALL.
Plotter setup menu
Cursor (red rectangle)
00-01
+000.0 s
+000.0 s
00:11-29
+000.0 s
+000.0 s
01 R-G
+00.00 LANE
+00.00 LANE
1. LORAN-A 2. LORAN-C 3. DECCA
1. YES 2. NO
2. NO
1 2 3 4 5 6 7 8
1. DAY 2. NIGHT 3. TWILI 4. MANUAL
03:1L5 04:1L6