11.16 Programmable Key Setup - Furuno GP-3500F Operator's Manual

11.16 Programmable Key Setup

The programmable key ([PROG] key) provides one-touch execution of desired
function. Also, the [SHIFT], [RANGE], [GAIN] and [VRM] keys can be
programmed for other functions. The default programs for these keys settings
are as shown in the table below.
Key label
PROG
SHIFT
RANGE
GAIN
VRM
If the above settings are not to your liking, you may change them as below.
1. Press the [MENU] key to show the main menu.
2. Press the [0] key to show the SYSTEM SETUP menu.
3. Press the [3] key to show the PROGRAMMABLE KEYS & REMOTE
CONTROLLER SETUP menu.
4. Rotate the [ENTER] knob to select the key name you want to change the
function, and then press the [ENTER] knob.
If you want to change the function of the [PROG] key, for example, select
"PROGRAMMABLE KEYS SETUP." The PROGRAMMABLE FUNCTIONS LIST
appears.
5. If page 1/2 appears, rotate the [ENTER] knob clockwise to select NEXT
PAGE.
Shows the WAYPOINTS LIST.
Shows E/S SHIFT window.
Shows E/S RANGE window.
Shows E/S GAIN window.
Use the VRM function. (only when the menu is not shown.)
0-3. PROGRAMMABLE FUNCTIONS LIST
PREVIOUS PAGE
E/S SHIFT
E/S RANGE
E/S GAIN
E/S AUTO MODE
E/S NOISE LIMITER
E/S CLUTTER
E/S WHITE MARKER
E/S HUE
E/S SIGNAL LEVEL
E/SPICTURE ADV
TURN KNOB TO SELECT MENU AND PRESS KNOB TO ENTER.
ZOOM IN: PREVIOUS PAGE
Programmable functions list
11. VIDEO SOUNDER OPERATION
Functions
ZOOM OUT: NEXT PAGE
2/2
11-31