Erasing Routes; Setting Ship's Speed For Ttg - Furuno GP-3500F Operator's Manual

6. ROUTE
6.3

Erasing Routes

1. Press the [MENU] key to show the main menu.
2. Press the [2] key to show the ROUTES LIST.
3. Rotate the [ENTER] knob to select the route you want to erase.
4. Press the [CLEAR] key to show the following message.
ARE YOU SURE?
YES ... PRESS KNOB
NO ... PRESS CLEAR KEY
5. Press the [ENTER] knob.
6. Press the [MENU] key several times to close the menu.
6.4

Setting Ship's Speed for TTG

Calculation of TTG is based on ship's speed data. This data can be set manually
or automatically.
1. Press the [MENU] key to show the main menu.
2. Press the [2] key to show the ROUTES LIST.
3. Rotate the [ENTER] knob to select SPD TO CALC TTG.
4. Roll the trackball in left-right direction to select "ACTUAL SPD" or SIM SPD."
For ACTUAL SPD, go step 6. For SIM SPEED, go to step 5.
ACTUAL SPD: The actual ship's speed is used.
SIM SPD:
5. Press the numeric keys to enter the speed value, and then pres the [ENTER]
knob.
6. Press the [MENU] key several times to close the menu.
6-6
ROUTE NAME XXXXXX
WILL BE DELETED.
Normal route
Erasing message
The simulated speed is used.
ROUTE NAME XXXXXX
IS USED FOR NAVIGATION
WILL IT BE DELETED?
YES ... PRESS KNOB
NO ... PRESS CLEAR KEY
Destination route