Contour Lines Setup Menu - Furuno GP-3500F Operator's Manual

9. CUSTOMIZING YOUR UNIT
9.1.3

CONTOUR LINES SETUP menu

You can select the color of contour lines which are lines colored according to
depth. In this paragraph, the operating procedure for NavCharts is described.
1. Press the [MENU] key to show the main menu.
2. Press the [7] key.
3. If the CHART SETUP menu appears, rotate the [ENTER] knob clockwise to
show the CONTOUR LINES SETUP menu.
4. Rotate the [ENTER] knob to select CONTOUR LINES, and then press the [1]
key to select "1. ON."
5. Rotate the [ENTER] knob to select DEPTH<10 m, and then press an
appropriate numeric key to select a color.
6. Set the colors for DEPTH=10 m and DEPTH>10 m also.
7. Rotate the [ENTER] knob to select DEPTH INFORMATION, and then press
an appropriate numeric key to select a color for depth information.
8. Rotate the [ENTER] knob to select CONTOUR LINES AREA, and then use
the numeric keys to enter the depth area for which you want to show contour
lines.
9. Press the [MENU] key several times to close the menu.
9-6
7. CHART SETUP
GOTO CHART DETAILS SETUP
CONTOUR LINES
DEPTH < 10 m
DEPTH = 10 m
DEPTH > 10 m
DEPTH INFORMATION 0. OFF
CONTOUR LINES AREA
TURN KNOB TO SELECT MENU.
SELECT THE ITEM OF EACH MENU BY TRACKBALL.
Chart setup menu
1. ON 2. OFF
0. OFF
0. OFF
0. OFF
11100 00328 ft