Furuno GP-3500F Operator's Manual page 21

DISPLAY MODE PAGE 1/4
1. PLOTTER 2. PILOT
NAV INFO 2
NAV INFO 1
4. PLOTTER 5. PLOTTER
E/S 50 kHz E/S 200 k
7. E/S 50 kHz 8. E/S 200 k
SINGLE SINGLE
0. GO TO PAGE 2.
TURN KNOB TO SELECT DISPLAY MODE AND PRESS KNOB TO ENTER.
OR PRESS APPROPRIATE NUMERIC KEY TO SELECT DISPLAY MODE.
PRESS "0" KEY TO GOTO PAGE 2.
[0] key
DISPLAY MODE PAGE 4/4
1. PLOTTER 2. PLOTTER
NAV INFO 1
4. PILOT 5. PILOT
NAV INFO 1
7. E/S DUAL 8. COMPASS
PLOTTER
0. GO TO PAGE 1
TURN KNOB TO SELECT DISPLAY MODE AND PRESS KNOB TO ENTER.
OR PRESS APPROPRIATE NUMERIC KEY TO SELECT DISPLAY MODE.
PRESS "0" KEY TO GOTO PAGE 1.
3. Press appropriate numeric key to choose a display.
Selected display replaces display mode page.
Note: The DISPLAY MODE screens can store a total of 36 displays, nine on
each of four pages. You may program the DISPLAY MODE screens as
desired. For further derails, see paragraph 9.6.1 for plotter displays and
paragraph 11.17 for sounder displays.
3. PLOTTER
E/S DUAL
[0] Key
6. E/S DUAL
9. E/S 200 k
BTTM Lock
TURN KNOB TO SELECT DISPLAY MODE AND PRESS KNOB TO ENTER.
OR PRESS APPROPRIATE NUMERIC KEY TO SELECT DISPLAY MODE.
PRESS "0" KEY TO GOTO PAGE 3.
3. PLOTTER
NAV INFO 2
[0] key
6. PILOT
NAV INFO 2
9. GPS STATUS
TURN KNOB TO SELECT DISPLAY MODE AND PRESS KNOB TO ENTER.
OR PRESS APPROPRIATE NUMERIC KEY TO SELECT DISPLAY MODE.
PRESS "0" KEY TO GOTO PAGE 4.
DISPLAY MODE screen
1. BASIC OPERATION
DISPLAY MODE PAGE 2/4
2. E/S 50 kHz
1. E/S DUAL
SINGLE
4. E/S 50 kHz 5. E/S 50 kHz
BTTM Zoom BTTM Lock
7. NAV INFO 1 8. PLOTTER
E/S 50 kHz E/S 50 kHz
0. GO TO PAGE 3
DISPLAY MODE PAGE 3/4
1. E/S DUAL 2. E/S 200 k
SINGLE
4. E/S 200 k 5. E/S 200 k
BTTM Zoom BTTM Lock
7. NAV INFO 1 8. PLOTTER
E/S 200 k E/S 200 k
0. GO TO PAGE 4
3. E/S 50 Hz
MRKR Zoom
6. 50 kHz
DSCRMMNATN
9. E/S 50 kHz
A-SCOPE
[0] key
3. E/S 200 k
MRKR Zoom
6. E/S 200 k
DSCRMNATN
9. E/S 200 k
A-SCOPE
1-11