Programmable Keys & Remote Controller Setup Menu; Programmable Key Setup - Furuno GP-3500F Operator's Manual

9.5 PROGRAMMABLE KEYS & REMOTE
CONTROLLER SETUP Menu
This paragraph shows how to program keys and the remote controller (option).
9.5.1

Programmable key setup

The [PROG] key provides one-touch execution of desired function. Further, the
[SHIFT], [RANGE], [GAIN] and [VRM] keys can also be programmed for other
functions. The default programs for those keys are as shown in the table below.
Key label
PROG
SHIFT
RANGE
GAIN
VRM
If the above settings are not to your liking, you may change them as below.
1. Press the [MENU] key to show the main menu.
2. Press the [0] key to show the SYSTEM SETUP menu.
3. Press the [3] key to show the PROGRAMMABLE KEYS & REMOTE
CONTROLLER SETUP menu.
Shows the WAYPOINTS LIST.
Shows E/S SHIFT window.
Shows E/S RANGE window.
Shows E/S GAIN window.
Use the VRM function. (When the menu is turned off.)
9. CUSTOMIZING YOUR UNIT
Functions
9-21