Deleting Files - Furuno GP-3500F Operator's Manual

10. RECORDING & PLAYING BACK DATA
Note 1: To escape, press the [CLEAR] key instead of the [ENTER] knob.
Note 2: Loaded and current data are processed as follows:
Tracks: Since loaded track data is added to internal track, oldest track will be
erased when the track memory capacity is exceeded.
Waypoints & routes: The loaded data replaces data previously stored.
Marks and lines: The loaded data is added to internal data. When the mark/line
memory becomes full no marks may be entered.
Setting data: The loaded data replaces current configuration settings. If the
memory card is ejected while loading or data could not be loaded, push the
[ENTER] knob to restart. Note that track memory allocalion is not saved or
loaded.
10. Press the [ENTER] knob.
When loading SETTING DATA, the unit restarts automatically.
11. Press the [MENU] key several times to close the menu.
10.2.5

Deleting files

1. Insert a memory card into the left slot.
2. Press the [MENU] key to show the main menu.
3. Press the [3] key to show the MEMORY CARD OPERATIONS & DATA
TRANSFER menu.
4. Press the [4] key to select DELETE FILE IN MEMORY CARD menu.
Note: When the memory card has no data, a beep sounds at step4.
5. Rotate the [ENTER] knob to select the file to delete, and then press the
[ENTER] knob.
6. Press the [ENTER] knob to delete file, or press the [CLEAR] key to escape.
7. Press the [MENU] key several times to close the menu.
10-8
3-4. DELETE FILE IN MEMORY CARD
FILE NAME
FILE 1
FILE 2
TURN KNOB TO SELECT FILE TO DELETE.
PRESS KNOB TO DELETE FILE.
Delete file in memory card menu
DELETE FILE.
ARE YOU SURE?
YES ... PRESS KNOB
NO ... PRESS CLEAR KEY