How To Eject An Sd Card; How To Save Data To An Sd Card; How To Rename Files On An Sd Card - Furuno GP-1670F Operator's Manual

9. MEMORY CARD OPERATIONS
9.3

How to Eject an SD Card

To prevent loss of data on an SD card, eject the SD card from the RotoKey menu.
Open the Full RotoKey menu then select [Eject SD]. After ejecting the SD card, close
the cover.
9.4

How to Save Data to an SD Card

1. Open the [GENERAL] menu and select [MEMORY CARD].
2. Select the tab ([Point], [Route], [Track], [Screen], [Default]) corresponding to the
item that you want to save.
3. Use the RotoKey
"Saving completed". to appear. Do not remove the card until the message ap-
pears. Press the ESC/MENU key to erase the message. In the example, below
the ship's tracks were saved.
The default file name is FILExxxx (xxxx=next sequential file number). If desired,
you can change the name. A file name may have a maximum of 13 alphanumeric
characters. See section 1.13 for how to enter alphanumeric data.
1
9.5

How to Rename Files on an SD Card

1. Open the [GENERAL] menu and select [MEMORY CARD].
2. Select the appropriate tab at the top of the screen.
3. Select the file to rename then press the ENT key to show the context-sensitive
menu.
4. Select [RENAME].
5. Edit the file name as appropriate, with the CursorPad.
9-2
TM
to select [Save] then push the key. Wait for the message
FILE0001 1 03-25-12 12:39PM