Waypoint, Route Format - Furuno GP-7000 Operator's Manual

9. DATA TRANSFER
9.3

Waypoint, Route Format

You may transfer waypoint and route data to another GP-7000 series unit or a
PC in Standard or Furuno format, via the NMEA1 port, NMEA2 port or PC NMEA
IN port.
1. Press the [MENU] key to show the menu bar.
2. Rotate the [ENTER] knob to choose ADVANCED from the menu bar and then
push the [ENTER] knob.
3. Rotate the [ENTER] knob to choose INPUT/OUTPUT and then push the
[ENTER] knob.
4. Rotate the [ENTER] knob to choose WPL/RTE FORMAT and then push the
[ENTER] knob.
5. Choose Furuno or Standard as appropriate and then push the [ENTER] knob.
Standard: NMEA format WPL and RTE sentences are output when "SEND"
is executed to transfer waypoint list or route list.
Furuno: Waypoint and route data in Furuno original format (P sentence) are
output when "SEND" is executed to transfer waypoint list or route list.
Waypoint color, shape and comment data are also sent.
6. Press the [MENU] key to close the menu.
9-6
Standard
Furuno