Hiding Or Showing Waypoints; Searching Waypoints - Furuno GP-7000 Operator's Manual

4.5.2

Hiding or showing waypoints

Waypoints can be shown or hidden individually or collectively on the plotter
display as below.
1. Open the WAYPOINT LIST.
2. Press the cursor pad (▲▼) to choose the waypoint you want to show or
hide.
All waypoints can also be shown or hidden.
3. Rotate the [ENTER] knob to choose MODE at the bottom of screen, and then
push the [ENTER] knob.
4. Rotate the [ENTER] knob to choose option desired.
SHOW:
ICON:
HIDE:
SHOW ALL: Shows the names and marks of all waypoints.
ICON ALL: Shows only marks of all waypoints.
HIDE ALL: Hides the names and marks of all waypoints.
5. Push the [ENTER] knob.
6. Press the [CLEAR] key to close the menu.
4.5.3

Searching waypoints

You can search for waypoint by name as follows.
1. Open the WAYPOINT LIST.
2. Press the cursor pad (▲▼) to choose the waypoint desired.
3. Choose PLOT at the bottom of the screen.
4. Push the [ENTER] knob.
The plotter display appears with the waypoint chosen at step 2 at the screen
center.
SHOW
ICON
HIDE
SHOW ALL
ICON ALL
HIDE ALL
Mode window
Shows the name and mark of the waypoint selected at step 2.
Shows only the mark of the waypoint selected at step 2.
Hides the name and mark of the waypoint selected at step 2.
MODE
4. WAYPOINT
4-9