Route; Entering Routes - Furuno GP-7000 Operator's Manual

5.

ROUTE

Often a trip from one place to another involves several course changes,
requiring a series of route points (waypoints) which you navigate to, one after
another. The sequence of waypoints leading to the ultimate destination is called
a route.
5.1

Entering Routes

You can store up to 200 routes and a route may consist of 35 points.
1. Press the [MENU] key to show the menu bar.
2. Rotate the [ENTER] knob to choose PLOTTER and then push the [ENTER]
knob to show the PLOTTER menu.
TRACK
ROUTES
WAYPOINTS
MEMORY CARD
TRACK
WAYPOINTS
3. Rotate the [ENTER] knob to choose ROUTES and then push the [ENTER]
knob to show the route list.
Note: The route list can also be shown by placing the cursor on a waypoint
4. Rotate the [ENTER] knob to choose NEW at the bottom of screen and then
push the [ENTER] knob to show the new route menu.
The new route is automatically named with the youngest empty route number
and current date is used as the comment. Name and comment may be changed
if desired.
11999/12000
12/2000
and then pressing the ROUTE LIST soft key.
N NAME
1 0001RT
FIND NEW
PLOT DELETE
SEND RECEIVE
Number of tracks and waypoints in use
Plotter menu
ROUTE LIST
COMMENT LENGTH
00:10 MAY3104 1.901 nm
EDIT
REVERSE
CONNECT
Route list
WAYPOINTS
3
RENAME COMMENT
COLOR SEARCH
SELECT REPORT
5-1