How To Set Route Start Position - Furuno GP170D Installation Manual

3. ADJUSTMENTS
3.8

How to Set Route Start Position

You can set the route start position when setting a destination.
1. Access the service menu (Refer to section 3.4).
2. Press the MENU/ESC key to open the main menu.
3. Select [6 Maintenance] then [6 Service].
4. Select [4 RTE start POSN].
5. Select [1 Waypoint] or [2 Own Ship].
[Waypoint]: Sets the first waypoint of the route as start position.
[Own Ship]: Sets the own ship position at the time when setting a destination as
start position.
Note: Select [Waypoint] when using the GP-170 as type-approved equipment.
6. Press the MENU/ESC key to close the main menu.
3-20