Time Code Output While Paused [Rep Pause Tc]; Time Code Output While Paused - Fostex PD606 Owner's Manual

Time code output while paused [Rep pause TC]

Using the "Rep pause TC" menu item, you can select whether time code is output from the
[TIME CODE OUTPUT] connector or not while the recorder is paused.
1) When the unit is stopped, press the [SHIFT] key to light the [SHIFT] indicator, followed by the
[TIME/TC SET] key.
The display now shows the TC SETUP menu screen.
2) Use the [MENU] dial to select the "Rep pause TC" menu item, and press the [ENTER/YES] key.
The current setting starts flashing and you can now select "On" or "Off".
3) Use the [MENU] dial to select the desired option, and press the [ENTER/YES] key to confirm
your selection.
On
Off
4) Press the [EXIT] key repeatedly until you exit the MENU mode.
You can select from among "On" and "Off" (the default is "Off").
When the "Sel TC Out" menu item is set to "Repro" and the unit is stopped (or paused), a
paused time code value (same time code value) is output intermittently.
When the "Sel TC Out" menu item is set to "Repro" and the unit is stopped (or paused), no
time code is output.
Chapter 8: MENU mode/TC SETUP menu
Options
Location Recorder Model PD606
Flashing
193