Table of Contents
Advertisement
Chapter 8: MENU mode/DISK UTILITY menu
HDD operating time display [HDD Ope. Time]
Using the "HDD Ope. Time" item, you can view the operating time of the internal hard disk
drive since it is formatted at the factory.
<Note>:
The internal hard disk drive as well as the optional hard disk drive (Model EX-
HD1) is formatted at the factory and then used for testing and inspection. Therefore, if
you check the hard disk operating time just after purchasing the unit, it may not show
"0000H".
1)
While the unit is stopped, press the [SHIFT] key to light the [SHIFT] indicator, followed by the
[ENTER/YES] key.
The unit enters the MENU mode and the MENU list screen is shown.
2)
Use the [MENU] dial to select the "DISK UTILITY" menu and press the [ENTER/YES] key.
The display now shows the DISK UTILITY menu screen.
3)
Use the [MENU] dial to scroll down the screen until you can see the "HDD Ope. Time" item
at the bottom.
The current operating time of the hard disk drive is shown.
4)
Press the [EXIT] key repeatedly until you exit the MENU mode.
212
Location Recorder Model PD606
Advertisement
Chapters
Table of Contents
