Ubit Setting Of Playback Time Code [Ref Tc Ubit]; Ubit Setting Of Playback Time Code - Fostex PD606 Owner's Manual

Chapter 8: MENU mode/TC SETUP menu
UBIT setting of playback time code [RepTC Ubit]
Using the "RepTC Ubit" menu item, you can select the desired userbit of time code which is
output from the [TIME CODE OUT] connector while the [Sel TC Out] is set to "Repro".
1) When the unit is stopped, press the [SHIFT] key to light the [SHIFT] indicator, followed by the
[TIME/TC SET] key.
The display now shows the TC SETUP menu screen.
2) Use the [MENU] dial to select the "Rep TC Ubit" menu item, and press the [ENTER/YES] key.
The currently selected time code userbit flashes (the default is "EEEEERRR"). You can
now select the userbit.
3) Use the [MENU] dial to select the desired TC userbit, and press the [ENTER/YES] key to
confirm your selection.
EEEEERRR
MMDDYYff BG_76: MM (month)/BG_54: DD (day)/BG_32:YY (year)/BG_10: ff (US)
DDMMYYff BG_76: DD (day)/BG_54: MM (month)/BG_32:YY (year)/BG_10: ff (EUR)
SSSSSSRR
RRREEEEE BG_756: RRR / BG_54321: EEEEE
SSSSSSTT BG_756432: SSSSSS / BG_01: TT
<BWF UBIT>
EEEEE:EVENT No:
RRR:REEL No:
RR:REEL No:
SSSSSS:SCENE No: Only the lower six figures of the scene number recorded on BWF are output from
TT:Take No:
ff:
<Note>:
file. The event number, reel number, scene number, and take number must be set
using the appropriate menu items in advance.
4) Press the [EXIT] key repeatedly until you exit the MENU mode.
192
Location Recorder Model PD606
BG_76543: EEEEE / BG_210: RRR (default setting)
BG_756432: SSSSSS / BG_10: RR
Outputs the userbit in the BWF descriptor information.
Only the lower five figures of the numeral information in the event information
recorded on BWF are output from the rightmost five digits of the user bit fields.
Only the lower three figures of the reel number recorded on BWF are output from
the rightmost three digits of the user bit fields.
Only the lower two figures of the reel number recorded on BWF are output from
the rightmost two digits of the user bit fields.
the rightmost six digits of the user bit fields.
Only the lower two figures of the take number recorded on BWF are output from
the rightmost two digits of the user bit fields.
File No (in decimal, 01 to 99)
Date information (year, month and day) shows the original date of an audio
flashing