Page 1
8289641000 (477325) Model PD204 Owner's manual <Version 1.01 supplement> With the upgrade of the PD204 to version 1.01, the following changes have been made. The limiter parameter setting function in the SYS SETUP menu of the MENU mode has been enhanced.
Page 2
Model PD204 Owner’s manual <Version1.01 supplement> Limiter parameter setting The limiter parameter setting function has been enhanced and you can now make limiter pa- rameter setting for the input channels and stereo output busses individually. With the earlier version, the "Limiter parameter" menu item in the "SYS SETUP" menu of the MENU mode is provided to make limiter parameter setting for both the input channels and stereo output busses simultaneously.
Page 3
Model PD204 Owner’s manual <Version1.01 supplement> Threshold level setting You can select "-6dBFS" or "-12dBFS". (The default is "-6dBFS".) Ratio setting You can select "1:3" or "1:5". (The default is "1:5".) Limiter level detection mode setting You can select "Peak" or "RMS" (The default is "Peak".) The level detector detects the peak level of a signal.